Home Products References Galery Contact Us


ROWLESS FORAGE HARVESTER



TECHNİCAL FEATURES
Rear mounting

Lenght Without Spout (mm)

2710

Lenght Wıth Spout (mm)

5110

Width (mm)

1995

Height With Spout Up (mm)

4660

Height With Spout Down (mm)

2560

Side Mounting

Lenght Without Spout (mm)

2710

Lenght Wıth Spout (mm)

5110

Width (mm)

3310

Height With Spout Up (mm)

4660

Height With Spout Down (mm)

2560

Working Speed

Appoox Up to 10 km/h

No. Of Intake Compaktors (psc)

1

No. of Minking blades (psc)

12

P.T.O. Speed (r/pm)

1000

Total Weight(kg)

1 200

Main Transmission

With Transmission

  
The Row Independent Maize Chopper
has a working width of 1,995 m. and with its cutter and feeder drum it can chop many rows of maize at one pass. One of the most important specification of the machine is its foldable chassis. The chassis can be folded so that the machine stays behind of the tractor. By driving backwards the machine can open a way in the middle of the field in order to decrease the number of turns on the field and decrease the fuel consumption of tractor.
The cutter and feeder drum carries the maize to the feeding unit. Row independent maize chopper's feeding system is designed to feed the flywheel at right angles for the best quality silage. The flywheel is equipped with 12 special hardened knives revolving at nearly 1000 rpm.
While in operation, height adjustable wheel maintain an even working height thus preventing the intake of earth and stones in bad conditions.

The height of the machine can be reduced by folding down the upper part of the chu

 

MAIZE CHOPPER


Row count

1 One(row of maize)

Length (mm)

2320

Width (mm)

2370

Height (mm)

3150

Chopping Blades Nu.( pcs)

12

Weight(kg)

465

PTO (rpm)

540-640

Minimum Power (Hp)

40

Silage Length (mm)

3 to 10

Horizontal Adjust.Cap. (pcs)

30

Tractor Attachment

3-Point-susp.Arrangement

Working Speed (km/h)

Up To12

Working Capacity (t/h)

35-40

Min.Dist.Betw.The Rows (cm)

60-70

Control Mechanism

Hydraulic

Rotor (rpm)

1475

 
    Maize chopper is an economical machine  powered directly by the tractor power-take-off shaft and it operates without tiring the tractor with low fuel depletion for long years without any problem. It is able to perform high-quality cutting even at the maximum work speed with its mowing discs that are made from special steel material with a high degree of hardness and that have the automatic grinding unit; in this way, the nutrients of the plants and the water content in the plant are preserved.
A crushing plate may be placed inside the cutting mechanism in order to crush the particularly dry corn particles. The silage length is determined with the help of the crushing plate that could be adjusted by means of a bolt. It blows the crushed material quickly from inside the discharge chimney towards the trailer Thanks to its strong fan and blower wings on the fan. The discharge chimney can be directed with a remote control without tiring the user. The chimney maybe extended. Thanks to its foldable chimney, one can easily use it on the lowest places. The machine parts are protected with a safety mechanism against the overloading.






Home Products References Galery Contact Us
         
Copyriht © 2005 - 2012 AGROKAEN
Webdesign by m&e